Submersible Sewage Pump (LQS 3 Phase Series)
| DN : | 3" – 4" |
| Q Max. : | Up to 1,500 L/min |
| Pressure : | Up to 22 m |
| Depth : | Up to 5 m |
| Power : | 2200 – 4000 W |
| pH: | 6 – 8.5 |
Feature
1. Submersible Pump, also known as a Submersible Sewage Pump, designed for pumping wastewater containing sludge and sediment.
2. Made of high quality materials.
3. The motor is wound with 100% pure copper for excellent electrical conductivity. The motor frame is made of cast iron for efficient heat dissipation.
4. The pump base is made of cast iron for strength and durability.
5. Supplied with a 10-meter power cable and plug.
6. Mechanical seal Ceramic-Graphite
7. The non-clog impeller allows coarse solids and sediment to pass through, helping reduce clogging inside the pump.
8. Equipped with a double mechanical seal, double O-rings, and an oil seal to help prevent water from entering the motor.
9. The shaft is made of stainless steel, providing high strength, durability, and corrosion resistance.
10. The bearings are designed with water- and dust-resistant properties for reliable operation.
11. Capable of pumping liquids with a pH range of 6 – 8.5
12. Ground wire for best protection.
Application
– Suitable for wastewater treatment and drainage applications in industrial facilities and commercial establishments.
– Suitable for canal dredging and construction site dewatering.
– Suitable for drainage stations and irrigation applications in agricultural areas.
| DN | 3" – 4" |
|---|---|
| Q Max. | Up to 1,500 L/min |
| Pressure | Up to 22 m |
| Depth | Up to 5 m |
| Power | 2200 – 4000 W |
| pH | 6 – 8.5 |
